The machines are made of stainless steel AISI-304, including the electrical cabinet
The machines have a matt (sand blasted) finish
Unless otherwise requested, the machine is completely wired together, requiring only the final connections to the main power source
Manual loading lid without any pneumatic aid
All cleaning phase and water inlet are manual
The discharge door has a manual lever
Rotation Speed of the plate is not adjustable
Upper Chamber can be dismantled, with a mechanical aid specialized and suitable for lifting
The machine does not produce hot water

Built in AISI304 stainless steel, includes electrical panel cabinet
Externally it has a shot-peened and opaque surface finish.
Unless otherwise requested, wiring is supplied, requiring only the final connections to the power supply networks for its start-up.
Fully manually controlled loading door, without any mechanical aid for movement
Totally manual work cycle in all its phases: start and stop of the turntable, introduction of water, movement of the doors
Fully manually controlled hatches, without any mechanical aid for movement.
Plate rotation speed not adjustable
Removable work compartment hood, with the help of a specialized mechanical operator and suitable lifting equipment
It does not produce hot water independently.

The units are suitable for the clearing of the small intestine (runner) of beef.
They are composed of groups mounted on the main tank(s) or on its own separate frame.
The number of groups varies from 2 to 4 groups and the roller widths are from 600, 800 and 1000mm.
Each group is equipped with food grade rubber rollers with stainless steel shafts inserted in a stainless steel gearbox.
There are two different styles of machine lines. The Standard Models use stainless steel bearings mounted inside the roller. The Economical Models use brass self greasing bushings.
Each group is protected by hinged safety covers, equipped with micro switches.
The intestine separated manually by the operator with a knife and using a pulling wheel mod.1/B, manually or with pneumatic chutes (supplied on request). The intestines are loaded by a chain conveyor and remain in tanks to soak. Gradually being processed through the line the casings are first emptied of its manure and defatted, then the mucosa is extracted and de-fatted at the same time. The final operation is conducted manually where the casings are introduced in a de-slimming machine to remove the outer slime.
The mucosa is collected in troughs and can be transported pneumatically to its final destination.
The lines are equipped with a fully integrated electrical control panel, separate command stations and a central security line.

Built in AISI-304 stainless steel, including electrical panel cabinet
Externally it has a satin surface finish.
Unless otherwise requested, wiring is supplied, requiring only the final connections to the power supply networks for its start-up.
Hopper loading with pneumatic actuator for sizes 10 and 15
O&C S Series Elevator Loading for Sizes 20 to 50
Unloading door with pneumatic actuator
Regulation of the rotation speed of the plate, by means of inverter
Automated work cycle through PLC in all its phases: loading, turntable start and stop, water introduction, door movement
Elevating work compartment hood by means of pneumatic actuators (except mod. 10, whose lifting is manual)
Leg and head hair removal machines are externally insulated (except mod. D35)
It does not produce hot water independently.

The Bison sets the new standard in form fill and seal packaging. The Bison is designed for higher production and customization requirements.  It is incredibly versatile with four base configurations and numerous customization options to choose from.  The Bison was extensively researched, designed and tested and includes only the most sought after features.  Manufactured at our Kansas City, Missouri facility, UltraSource Bison rollstock packaging machines offer a fresh approach with innovative features.

The Bison features high output speeds. The base model is 12 feet in length and 4-foot loading, labeling, and discharge expansions can be added. The Bison is adaptable for virtually any sized processor and is built to operate in wash down environments. Parts and service are available from our centrally located Kansas City facility. 

The Ultravac 600 vac packer offers triple the packaging production of common tabletop vacuum packaging machines. With two 20” seal bars on both sides, and one 24.5” on the front side of the chamber you get 64.5” of usable sealing bar length. The Ultravac 600 vacuum packaging machine can increase efficiency, extend product shelf life, and improve your package seal quality! All UltraSource vacuum chamber machines are HACCP compliant as long as vacuum packaging, also known as Reduced Oxygen Packaging (ROP) is identified as a critical control point in your HACCP plan and the plan documents the controls for Clostridium botulinum and Listeria monocytogenes.

UltraSource UltraBoots have been designed for performance in a variety of industrial and commercial settings. UltraBoots are made from comfortable, durable and chemical resistant polyurethane that will far outlast PVC boots and help keep workers more comfortable. Simply superior to competitors!

- Helps insulate against cold temperatures and the material will not stiffen in the cold.
- Plush, ergonomic insoles that provide both arch and back of foot support. Air pockets near heel of foot provide comfort.
- Heavy duty soles with deep and wide tread design provide for a sturdy foot platform and better footing while working in areas with proteins and fats on the floor. 
- Designed with an arched "cowboy cut" opening to reduce rubbing and make them easier to don and take off.
- Large kick-off lug for easy removal.
- 3 molded flex points for a greater range of motion while working throughout the day.
- Design and softer materials help accommodate narrow to wide foot widths.
- The self-cleaning outsole has many exit points to help move large proteins/fats to exit the deep and wide tread channels. This premium slip-resistant design enables greater surface contact for superior traction.
- Delivered sealed in bags; not boxes, to make them easier to organize and to reduce contamination and reduce paper waste.
- Safety toe meets ASTM F2413 -11 I/75 and C75. The safety toe is made of lightweight materials and provides greater foot comfort with cold and heat insulating properties.
- Standard 15" height for great protection against water and other fluids.

UltraSource offers premium industrial cutlerly for commercial meat processors, chefs, butchers, food service workers, commercial kitchens and more. UltraSource offers curved and straight bladed commercial knives made from the finest materials for cutting meat, game, poultry, fish, vegatables, fruit and more. Complete your butcher supply with boning UltraKnives that are available in different lengths, flexibility, and styles.  
- Premium meat processing boning knives in a variety of lengths and blade flexibility options
- High quality Molybdenum steel 
- Cryogenic treatment enhances performance and retains edge longer 
- Antibacterial textured handles are NSF certified 
- Front and rear bolsters protect against slippage 
- Popular knives of butchers, meat packers and processors, commercial / food service kitchens, home chefs
- Low cost commercial knives 
- 5" or 6" blade length
- Stiff, semi-flexible- or flexible blade choices
- Straight or curved knife blade options

PLC & HMI Control System

The ANCO Duracut Crusher is designed specifically for bone or whole carcass crushing. The Duracut unit has a one-pass design that emits a particle size suitable for feeding any conveying or pumping system. These particles are small enough for any batch or continuous rendering system. The Duracut Crusher can process up to 50 tons of raw material per hour and the inline design makes for easy installation, maintenance, and operation.

The ANCO 1045 Crusher is one of the largest pre-breakers in the industry, handling size capabilities of up to 80,000 lbs. per hour without precutting whole animals. The 1045 Crusher has the longest life expectancy of any Crusher in the rendering industry, while remaining cost efficient. Using the latest metallurgical technology, the cast alloy steel parts are stronger than any other on the market. Each hammer is individually machined, producing a scissoring effect when combined with the anvil. The sharp hammers can slice through large bones or soft material, while providing a uniform particle size. The 120 RPM shaft speed assures low impact stress to the unit.

Description
All ANCO Screw Conveyors are constructed from the highest quality helicoid flight type, made of helix, and formed from a flat steel bar mounted on a pipe or shaft. Our experienced engineering department will prepare layouts and specify suitable types of trough, pitch, discharge, spouts, covers, and drives to fit your requirements.

Whether the product involves seafood, poultry, meat, pet food, or any other processing application, ANCO grinders are available in a variety of sizes and models to meet your production needs. Each unit is custom built to your specifications and provides trouble-free production, hour after hour. The ANCO 1101 grinder series can also be fitted with a Positive Displacement Pump to grind and transfer your product in one application.

The compact 500 is a "ready to use" processing line that allows working up to 500 chickens per hour.

The COMPACT 500 line, which is the main adviser in chicken slaughter, meets the latest hygiene and quality requirements in poultry processing.

Made of stainless steel, all COMPACT components are easily accessible to ensure proper cleaning.

The compact 1 500 is a "ready to use" processing line that can handle up to 500 chickens per hour.

The COMPACT 1 500 line, which is the main adviser in chicken slaughter, meets the latest hygiene and quality requirements in poultry processing. Made of stainless steel, all COMPACT components are easily accessible to ensure proper cleaning.

The COMPACT 1500 equipment allows, in a reduced size, to integrate all the stages necessary for the slaughter of poultry, from stunning to plucking.

Description
The range of conveyors for your live bird unloading areas is a complete range that allows you to meet all the needs of the different slaughterhouses.

From roller conveyors to floor conveyors, our range of dock equipment is tailored to your slaughterhouses and needs. Thanks to our production area and our technicians, we offer you tailor-made conveyors fully adapted to your production units.

The compact 1 000 is a "ready to use" processing line that allows up to 500 chickens to be processed per hour.

The COMPACT 1 000 line, which is the main adviser in chicken slaughter, meets the latest hygiene and quality requirements in poultry processing. Made of stainless steel, all COMPACT components are easily accessible to ensure proper cleaning.

The COMPACT 1000 equipment allows, in a reduced size, to integrate all the stages necessary for the slaughter of poultry, from stunning to plucking.

SuperKlean’s new DuraFlow spray nozzle with a hook was specifically designed to prevent accidental spray as well as allow the user the capability to hang the nozzle when not in service. Its unique cover design is not only durable, but also prevents the front mounted levers, which reduce hand fatigue and offer smooth lever action, from being accidentally activated when the nozzle is dropped. The new DuraFlow spray nozzles also come with a trigger locking mechanism for a safe and secure method of maintaining the nozzle open at any spray pattern.
Variable spray patterns, adjustable from fan spray to solid stream, is one of the many features offered by the new SuperKlean DuraFlow spray nozzle. Water conservation is assured upon release of lever by the drip-free automatic shutoff feature.
SuperKlean DuraFlow spray nozzles are available in 300 series stainless steel and weigh a total of 1.53 Lbs.

SuperKlean is proud to introduce the newest addition to our line of quality products, the DuraReel spring driven hose reel. The DuraReel has a dual axle support system with a 1” axle which increases the stability during operation, reduces vibration and stregthens the structural integrity of the reel. A larger and sturdy single pedestal chassis and frame accomodates 50’ of any of our hose assemblies as well as any industry washdown hose within that length and up to 3/4” ID. The DuraReel is built with professional grade heavy duty steel with durable powder coat finish or professional grade heavy duty electro-polished stainless steel. The ribbed discs with rolled edges are CNC robotically spun and provide strength, safety, and durability. The DuraReel comes with a standard 90° 1/2“ NPT inlet swivel connection in either brass or stainless steel. The DuraReel is designed with a guide arm that adjusts to wall, floor, vehicle and overhead positions and has a solid one piece heavy gauge 1/4” base and support post for maximum stability. The DuraReel is designed with an enclosed factory tuned and matched cartridge-style spring motor with non-corrosive stainless steel spring, pawl, and multi-position lock ratchet mechanism which secures hose at desired length.

Designed specifically to provide individual outlets of hot or cold water.
Designed with two connection nuts for superior flexibility during installation.
Includes mounting plate, hose rack, and optional temperature gauge
SuperKlean’s single valve hot or cold water station was specifically designed to provide individual outlets of hot or cold water. The unit uses two connection nuts for superior flexibility during installation. SuperKlean’s inlet & outlet have the same dimensions as most of our competitors’ stations.Our stations come with a mounting plate for easy behind the unit cleanup and hose rack for easy user access to the hose.

Operates with as little as 30 PSI water pressure without the hassle of changing internal components
Dual output design with a Secondary Outlet at the top allows piping to other places like sinks, showers, etc. to supply hot water
Automatic shutoff feature built into the design to prevent live steam from passing through the unit

* Manufactured in iron with corrugated paint in the oven.
* Made with 5 mm thick sheets of iron, except for the table which is completely made of stainless steel.
* Small and compact, high performance and great power, designed for counters and / or restaurants.
* The switch is fast acting.
* Its table is fixed, it is formed by a piece of stainless steel, easy to use, for a better use of the meat, it is simple and quick for cleaning.

North® 54001 Full Facepiece has a wide sealing area to fit more facial types. Latex free with no natural rubber proteins which may cause an allergic reaction.
- Nose cup provides less dead air space and channels exhaled breath out
- Speech diaphragm is standard to amplify workers' conversations
- Wide panoramic lens provides optimal field of vision in all directions
- Polycarbonate lens meets ANSI requirements for high impact
- Can be adapted to PAPR or supplied air for greater flexibility in the workplace

These Safety Zone® GRCA amber unlined (18 mil palm) latex gloves feature a recessed, diamond grip for a maximum hold during tough cleaning jobs and other wet conditions. The pinked cuffs make donning and doffing easier to be more productive in a fast-paced environment. They comply with the Federal Food, Drug, and Cosmetic Act for repeated contact with food, which is perfect for poultry processing and restaurants.

These Tingley 26256 Flite™ Composite Safety Toe Boots are made using proprietary Aerex 1.5.5™ microcellular polymer that delivers 40% lighter weight compared to most rubber and PVC steel-toe boots. Aerex also adds chemical resistance and thermal insulation, making them great for chemical plants, farming, and food processing facilities. The Chevron-Plus® outsoles release dirt easily, resist chemicals, and they include anti-slip benefits to handle those wet or hazardous cleanups safely.

- System includes: 3M™ H-706P Pinlock Suspension Hard Hat for head protection against falling objects / 3M™ Peltor™ Metal Mesh Visor V1A helps provide face protection from sawdust, woodchips and other flying debris / 3M™ Peltor™ Ear muff H31P3E, NRR 23 /3M™ Hard Hat Sealer GR2B for front visor
- Requires protective eyewear, sold separately
- Short Brim Cap Style Hard Hats
- Unvented

Keep employees safe day and night with this Tingley V70629 Hi-Vis vest. The fluorescent lime colored material of this hi-vis safety vest ensures high visibility with most environments in the daylight, while silver reflective bands wrap around the shoulders and waist for outline definition at night. It complies with ANSI 107 regulations regarding hi-vis vests to protect workers on public roadways and make them visible to oncoming traffic. Its sleeveless design makes it easy to slip on quickly, and hook and loop fasteners secure it during active work days. This Tingley V70629 Hi-Vis vest's two interior pockets let you keep tools and small objects close at hand without impairing visibility.

The Wells Lamont Y9239T FlexTech™ Hi-Vis Thermal Lined Nitrile Glove protects your hands and gives you superior grip performance. This thermal glove features a synthetic knit shell for a breathable, more comfortable fit, and a snug wrist cuff ensures a close fit that prevents dirt and debris from entering the glove. The hi-vis nitrile glove also provides medium-level cut protection with a rating of ANSI Level 3. Perfect for use in cold environments, this thermal nitrile glove features a brushed fleece thermal lining for an additional layer of warmth and protection.

• Cut both horns from all meat closer to the skull than is possible with traditional shear-type dehorners.
• 1.5 second cycle for high speed production.
• Eliminates difficulties associated with pulling the skin over the head.
• Optional shell blades produce an even deeper cut, completely under the base, ideal for the second US cut.
• The best possible hygiene with an updated construction, practically all stainless steel: minimal corrosion problems.
• Robust construction for long trouble-free life.
• Anti-lashing controls for operator safety.
• Meets national and international safety and hygiene requirements.

DESOLLADORA

• The number 1 recognized worldwide for beef, pork and sheep.
• To obtain in the skins the highest quality: descuere perfect, without marks, and without cuts or tears.
• High capacity, high performance of the tool, designed for a long life and low maintenance.
• Efficient motor design; consumes only 12 feet 3 / min. at 45 psi (3.34m3 / min at 3.1 bar).
• Extra thin head in stainless steel in the center for exceptional handling and resistance to force.
• Lightweight: only 2.9 lbs. (1.3 kg.).

multi-purpose pneumatically powered scribe saw

The MCS 300 with a full 2 ​​hp motor and a maximum 4 3/8 inch (111 mm) depth of cut is ideally suited for primal cutting of:
• Beef: forequarters, chucks, shoulders, briskets
• Pork: chine bones and ham markings
• Lightweight - only 15.5 lbs / 7 kg
• Bearing mounted hanger for a smooth 360 degree rotation of the saw
• Heavy duty gears - made to withstand all uses in the packing plant industry
• All polished stainless steel construction
• Three different blade sizes to best suit the job
• All stainless steel construction for maximum hygiene

The Jarvis Model ES-4: low power electrical stimulator for calves.

• The Jarvis Model ES-4 applies a precisely controlled electrical current (at low voltage) to already bled animals, providing the following advantages:
- Better blood performance.
- Accelerates the decrease in pH: reducing the aging period and the loss due to contraction (shortening due to cold).
- Improves the quality of the meat.
- Helps hot boning.
• Stainless steel tweezers.

• The Jarvis USSS-21 model: high speed captive bolt stunner, operated pneumatically, ideal for sheep and large cattle.
• The stunned animal is rendered insensitive to pain by a stunning procedure by a shot fired by a person.
• Stunning bolt of the latest design for easy penetration and fast speed.
• The exclusive design camera housing consumes less air without losing performance.
• Easy to operate and operate: low recoil - less operator fatigue.
• Easy to maintain and clean.
• Stun more consistent and effective.
• features
• Operating pressure (normal) 150 - 190 psi 10.3 - 13.1 bar
• Operating pressure (maximum) 250 psi 17.2 bar
• Air consumption (per cycle) 170 psi (11.7 bar) 0.83 - 0.83 ft3 17.8 -23.5 L
• Diameter of the penetrating shaft (height x width) 0.75 x 0.52 in. 19 x 15.2 mm
• Control handles
• Dual pneumatic trigger
• Dim. (Length x width x height) 19 x 9 x 17.5 in.
• Weight (handles box martinete) 482 x 229 x 445 mm.
• Weight (handles immobilization device)​

Jarvis Buster V Loin Drop model - electric band saw for cutting beef loins (cutting).

• The large-scale production solution for cutting beef loins.
• It works very quickly: a single worker is capable of handling 900 beef loins per hour.
• Make the cut on the rail. Thus, it is not necessary to remove the sides of the beef from the rail, which reduces the labor required.
• High cutting precision.
• Does not splinter the carcass bones.
• Easy to clean for good hygiene.
• Sturdy construction for long durability.
• Anti-tie controls for operator safety.

Sierras hidráulicas Jarvis modelos MG-1, MG-1HS, MG-1B, MG-1BHS y MG-1BFQ para pechuga de vacuno, apertura de canales de cerdo y corte de cuartos delanteros.

• La potente MG-1 corta todo tipo de faldas de piel de vacuno de forma rápida y sencilla. El alto rendimiento de la MG-1B proporciona una mayor velocidad, diseñada para cortar más de 200 piezas de ternera / hora. Los modelos MG-1HS y MG-1BHS son ideales para abrir y cortar faldones de canales de cerdo. La MG-1BFQ es la sierra de cuarto frontal perfecta.
• Los modelos MG-1 y MG-1HS son capaces de cortar la pechuga de ganado vacuno en 5 segundos, mientras que los modelos MG-1B, MG-1BHS y MG-1BFQS realizan el corte en 3 segundos.
• De tamaño pequeño y gran maniobrabilidad para un manejo óptimo.
• Su mecanismo de transmisión equilibrado hace que el manejo de todos los modelos MG-1 sea suave y silencioso, lo que reduce la fatiga del operador.
• Mínimo mantenimiento gracias al mecanismo lubricado en baño de aceite y sin componentes eléctricos.
• Cumple con los requisitos internacionales de seguridad e higiene.

Heavy-duty, multi-purpose pneumatic saw.
Special for quartering half beef (pork or beef), hanging from the rail.
9-inch circular blade of 72 and 140 teeth.
Powerful and light, ¾ HP with a weight of 5.5 Kg.
Cutting depth: 90mm.
Air pressure: 7 to 8.5 Kg / cm2
Air consumption: 1100 Lts / min

The Jarvis BR-5 / BR-5A model: for a perfect sharpening of the skinner blade.

• Sharpens 100mm (BR-5) or 110mm (BR-5A) blades according to original design specifications; reduces material removal and prolongs blade life.
• Automatic dubbing positioning - no fine tuning required, just select a fine, medium or heavy dubbing.
• Precision indexer perfectly centers each tooth, eliminating operator errors; minimal training is required.
• On the perfect BR-5 / BR-5A blades every time, nothing else is required.

The hydraulic model 30CL-1 is a hydraulic cutter of legs and horns of cattle in front and back.

In the front and rear of the cattle, cut the bone or joint. This tool is also an effective dehorner for bovine

With a cutting cycle of 1.5 seconds, it is a high production and high performance tool, widely used for the most demanding applications

It has bi-manual non-slip controls for operator safety.

Made of stainless steel
Pneumatic unloading by automatic cooker
Electric control panel included

Made of stainless-steel.
Entrance through automatic band.
Electrical control panel included.
Tray for the remains. 

Completely covered of stainless-steel.
Electrical control 24 V.
Switch on safety system EN 574.
Blade made of hardened special steel.
Piston stroke can be graduated according to the heads size.
No damaging of the brains. 

Made of stainless steel
Fixation by its base 400x400mm
Possibility of using different fasteners

Sewages reduction until 70%.
Made of stainless-steel.
Resistant blades mounted on the internal plate.
Pneumatic unloading with automatic cycle.
Cycle timing available to be set.
Electric panel included.
Can be combined with the loading lift.

BLOOD COOKER
Beef, pork and sheep
Boil the blood separating solid phase from liquid phase
Made of stainless-steel.
The final humidity in solid blood is around 30
Pneumatic unloading door for open to distance.
Cycle timing available to be set.
Electric control panel is included. 

Designed to process meat with hair

speed variation

made of stainless steel